Workshop – Chalfen of London

This is custom heading element

The Chalfen Promise

Chalfen customers receive a lifetime annual complimentary Maintenance and valuation.

Please click below to book your appointment.

This is custom heading element

Overtime your favourite jewellery might show visible marks of ageing. We can mask those dents, scratches, and imperfections with our jewellery restoration services. Our experts will gladly examine your pieces and let you know if the jewellery requires mild repairs or complete restoration.

Worried about handing over your cherished possessions to someone else?

You can trust us to handle your valuables with as much care as we bestow upon our precious diamonds and stones. Also, our experts already work with diamonds and jewels that are thousands of years old. That means, you can trust our experienced craftsman to keep your jewellery safe and sound.

Ring Dia ⌀ (Inside)		Ring Circumference (Inside)		‹ International Standard Sizes ›
MM	Inches	MM	Inches	UK / AU	USA / CA	Europe
9.9	0.390	31.1	1.22	·	0000	·
10.7	0.442	33.7	1.39	·	00	·
11.5	0.454	36.2	1.43	·	0	·
12.0	0.470	37.5	1.50	A	1/2	·
12.2	0.479	38.3	1.51	A 1/2	3/4	·
12.4	0.487	38.9	1.53	B	1	·
12.6	0.506	39.6	1.56	B 1/2	1 1/4	·
12.8	0.503	40.2	1.58	C	1 1/2	·
13.0	0.511	40.8	1.61	C 1/2	1 3/4	·
13.2	0.520	41.5	1.63	D	2	41 1/2
13.4	0.528	42.1	1.66	D 1/2	2 1/4	·
13.6	0.536	42.8	1.68	E	2 1/2	42 3/4
13.8	0.544	43.5	1.71	E 1/2	2 3/4	·
14.0	0.553	44.1	1.74	F	3	44
14.2	0.557	44.5	1.75	F 1/2	3 1/8	·
14.3	0.561	44.8	1.76	F 3/4	3 1/4	·
14.4	0.565	45.1	1.77	G	3 3/8	45 1/4
14.5	0.568	45.4	1.79	G 1/4	3 1/2	·
14.6	0.573	45.7	1.80	G 1/2	3 5/8	·
14.7	0.576	46.0	1.81	H	3 3/4	46 1/2
14.9	0.585	46.7	1.84	H 1/2	4	·
15.0	0.592	47.3	1.86	I	4 1/4	47 3/4
15.3	0.601	48.0	1.89	I 1/2	4 1/2	·
15.4	0.606	48.4	1.90	J	4 5/8	50
15.5	0.611	48.8	1.92	J 1/4	4 3/4	·
15.7	0.618	50.3	1.94	J 1/2	5	·
15.8	0.622	50.6	1.95	K	5 1/8	50
15.9	0.625	50.0	1.97	K 1/4	5 1/4	·
16.0	0.630	50.3	1.98	K 1/2	5 3/8	·
16.1	0.634	50.6	1.99	L	5 1/2	51 3/4
16.3	0.642	51.2	2.02	L 1/4	5 3/4	·
16.4	0.646	51.6	2.03	L 1/2	5 7/8	·
16.5	0.650	51.9	2.04	M	6	52 3/4
16.7	0.658	52.5	2.07	M 1/2	6 1/4	·
16.9	0.666	53.2	2.09	N	6 1/2	54
17.1	0.674	53.8	2.12	N 1/2	6 3/4	·
17.4	0.683	54.5	2.15	O	7	55 1/4
17.5	0.687	54.8	2.16	O 1/2	7 1/4	·
17.8	0.698	55.8	2.20	P	7 1/2	56 1/2
18.0	0.707	56.5	2.22	P 1/2	7 3/4	·
18.2	0.716	57.1	2.25	Q	8	57 3/4
18.4	0.722	57.7	2.27	Q 1/2	8 1/4	·
18.5	0.729	58.2	2.29	Q 3/4	8 1/2	·
18.6	0.733	58.5	2.30	R	8 5/8	59
18.7	0.736	58.7	2.31	R 1/4	8 3/4	·
18.8	0.740	59.1	2.32	R 1/2	8 7/8	·
18.9	0.743	59.3	2.35	R 3/4	9	·
19.1	0.752	60.0	2.36	S	9 1/8	60 1/4
19.2	0.757	60.4	2.38	S 1/4	9 1/4	·
19.3	0.760	60.7	2.39	S 1/2	9 3/8	·
19.4	0.764	61.0	2.40	S 3/4	9 1/2	·
19.5	0.768	61.3	2.41	T	9 5/8	61 1/2
19.6	0.772	61.6	2.43	T 1/4	9 3/4	·
19.8	0.781	62.3	2.45	T 1/2	10	·
20.0	0.780	62.9	2.48	U	10 1/4	62 3/4
20.2	0.795	63.5	2.50	U 1/2	10 1/2	·
20.3	0.800	63.8	2.51	V	10 5/8	63
20.4	0.805	64.2	2.53	V 1/4	10 3/4	·
20.7	0.814	65.0	2.56	V 1/2	11	·
20.8	0.817	65.2	2.57	W	11 1/8	65
20.9	0.821	65.5	2.58	W 1/4	11 1/4	·
20.9	0.824	65.8	2.59	W 1/2	11 3/8	·
21.0	0.830	66.2	2.61	W 3/4	11 1/2	·
21.2	0.834	66.5	2.62	X	11 5/8	66 1/4
21.2	0.836	66.7	2.63	X 1/4	11 3/4	·
21.3	0.838	66.9	2.64	X 1/2	11 7/8	·
21.5	0.846	67.5	2.66	Y	12	67 1/2
21.7	0.854	68.1	2.68	Y 1/2	12 1/4	·
21.9	0.861	68.8	2.71	Z	12 1/2	68 3/4
22.1	0.870	69.4	2.73	Z +1/2	12 3/4	·
22.3	0.879	70.2	2.76	Z+1	13	·
22.6	0.890	71.0	2.80	Z+1.5	13.5	·
22.7	0.893	71.3	2.81	Z+2	·	·
22.9	0.902	72.0	2.83	Z+2.5	·	·
23.0	0.908	72.5	2.85	Z+3	·	·
23.3	0.915	73.0	2.87	Z+3.5	·	·
23.5	0.924	73.7	2.90	Z+4	·	·
23.6	0.927	74.0	2.91	Z+4.5	·	·
23.9	0.940	75.0	2.95	Z+5	·	·
24.3	0.955	76.2	3.00	Z+6	·	·